 |
|||||
|
50-100mm Cavity - Eaves Standard & Inner Leaf
|
L1/E 50 |
|
For 50-80mm (max) cavity wall construction. For use at eaves level.
|
 |
Note:Maximum block dimensions 125mm (80mm cavity) Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1. This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1. This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications |
|
|
L1/E 75 |
|
For 70-100mm (max) cavity wall construction. For use at eaves level.
|
 |
Note:Maximum block dimensions 125mm (100mm cavity) Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1. This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1. This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications |
|
|
L1/E WIL 50 |
|
For 50-80mm (max) cavity wall construction. For use at eaves level.
|
 |
Note:Maximum block dimensions 150mm (80mm cavity) Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1. This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1. This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications |
|
