IG Ltd - Standard Lintels

95-110mm Cavity Wall Lintels

L1/S 100

For 95-110mm cavity wall construction.
Standard duty loading condition.

List
Price:

www.iglintelsprices.com

* A continuous bottom plate added

Note:Maximum block dimensions 125mm (95mm cavity)
Load ratio 1 - applies to loads with an inner to outer leaf ratio of between 1 :1 and 3 :1.
This ratio is normally applicable to lintels that support: a. masonry b. masonry and timber floors
Load ratio 2 - applies to loads with an inner to outer leaf ratio of between 4 :1 and 19:1.
This ratio is normally applicable to lintels supporting: a. constructions with concrete floors b. eaves applications

Manufactured Length 150mm increments	0600 1200	1350 1500	1650 1800	1950 2100	2250 2400	2550 2700	2850 3000	3150 3600	3750 4050	*4200 4800
Height ‘h’	88	88	107	125	150	162	171	200	200	200
Thickness ‘t’	1.6	2	2	2	2	2.6	2.6	3.2	3.2	3.2
Total UDL(kN) Load ratio (1)	12	16	19	21	23	27	27	27	26	27
Total UDL(kN) Load ratio (2)	10	13	16	17	18	22	20	20	19	22

[Back to Top]

L1/HD 100

For 95-110mm cavity wall construction.
Heavy duty loading condition.

List
Price:

www.iglintelsprices.com

* A continuous bottom plate added

Manufactured Length 150mm increments	0600 1200	*1350 1500	*1650 2100	*2250 2550	*2700 3000	*3150 3600	*3750 4200
Height ‘h’	110	135	163	203	203	203	203
Thickness ‘t’	3.2	3.2	3.2	3.2	3.2	3.2	3.2
Total UDL(kN) Load ratio (1)	30	30	40	40	40	35	33
Total UDL(kN) Load ratio (2)	22	22	35	35	35	32	28

[Back to Top]

L1/XHD 100

For 95-110mm cavity wall construction.
Extra heavy duty loading condition.

List
Price:

www.iglintelsprices.com

* A continuous bottom plate added

Manufactured Length 150mm increments	*0600 1500	*1650 1800	*1950 2100
Height ‘h’	163	163	203
Thickness ‘t’	3.2	3.2	3.2
Total UDL(kN) Load ratio (1)	50	50	55
Total UDL(kN) Load ratio (2)	45	45	45

[Back to Top]

Return to Standard Lintel Range